BJZGB - POLISH,METAL,CLEAN & POLISH STAINLESS STEEL
- MSDS: BJZGB
- Manufacturer: QPL CORP (WAS OMNITECH INTERNATIONAL)
- Product Name: POLISH,METAL,CLEAN & POLISH STAINLESS STEEL
- National Stock Number: 7930-00-926-5171
Product Identification
Product ID:POLISH,METAL,CLEAN & POLISH STAINLESS STEEL
MSDS Date:05/16/1988
FSC:7930
NIIN:00-926-5171
MSDS Number: BJZGB
Responsible Party
THIBODAUX, LA 70301
US
Emergency Phone: 504-449-0660
Info Phone: 504-449-8440FAX 504-446-7348
Preparer: LISA A. ROBICHAUX
Cage: JO788
Contractor
Telephone: 504-394-8440
Cage: 0AD61
Ingredients
METHYL CHLOROFORM (1,1,1-TRICHLOROEHANE) (SARA III)
CAS: 71-55-6
RTECS: KJ2975000
Fraction By Weight: 97%
OSHA PEL 350 PPM/450 STEL
ACGIH TLV: 350 PPM/450STEL;9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
Hazards
Health Hazards Acute and Chronic:DERMAL:MAY CAUSE DERMATITIS.
EYE:SEVERE IRRITATION, REDNESS, TEARING, BLURRED VISION.
INHALATION:NASAL AND RESPIRATORY IRRITATION. DIZZINESS, FATIGUE,
HEADACHE. INGESTION:MAY CAUSE NAUSEA, VOMITING DI ARRHEA.
Effects of Overexposure:DERMAL:MAY CAUSE DERMATITIS. EYE:SEVERE
IRRITATION, REDNESS, TEARING, BLURRED VISION. INHALATION:NASAL AND
RESPIRATORY IRRITATION. DIZZINESS, FATIGUE, HEADACHE. INGESTION:MAY
CAUSE NAUSEA, VOMITING DI ARRHEA.
First Aid
First Aid:WASH EXPOSED AREA THOROUGHLY WITH SOAP AND WATER. REMOVE
CONTAMINATED CLOTHING. EYES:FLUSH WITH WATER AT LEAST 15 MINUTES.
SEEK MEDICAL ATTENTION. INGESTION:DO NOT INDUCE VOMITING. IMMEDIATE
MEDICAL A TTENTION. INHALATION:REMOVE TO FRESH AIR. GET MEDICAL
ATTENTION.
Fire Fighting
Flash Point:>200F >93C
Extinguishing Media:WATER FOG OR SPRAY
Unusual Fire/Explosion Hazard:CONTENTS UNDER PRESSURE. CAN MAY BURST AT
TEMPERATURES ABOVE 130F.
Accidental Release
Spill Release Procedures:AVOID SKIN CONTACT. WEAR PROTECTIVE EQUIPMENT.
USE DRY ABSORBENT TO PICK UP BULK OF SPILL. DO NOT FLUSH TO SEWER.
Handling
Handling and Storage Precautions:DO NOT STORE NEAR COMBUSTIBLES. DO NOT
GET IN EYES OR ON SKIN. DO NOT BREATHE MIST, KEEP CONTAINER CLOSED.
KEEP AWAY FROM HEAT, SPARKS AND OPEN FLAME.
Other Precautions:KEEP OUT OF REACH OF CHILDREN!! CONTENTS UNDER
PRESSURE. DO NOT PUNCTURE OR INCINERATE.
Exposure Controls
Respiratory Protection:NOT NECESSARY UNDER NORMAL USE. FOR
PRECAUTIONARY MEASURES CARTRIDGE GAS RESPIRATORS.
Ventilation:PROVIDE SUFFICIENT MECHANICAL VENTILATION TO MAINTAIN
EXPOSURE BELOW TLV (S).
Protective Gloves:POLYETHYLENE
Eye Protection:CHEMICAL SPLASH GOGGLES.
Supplemental Safety and Health
Chemical Properties
HCC:V2
Boiling Pt:B.P. Text:161F,72C
Melt/Freeze Pt:M.P/F.P Text:-49F/-45C
Vapor Pres:135 @ 25C
Vapor Density:4.6
Spec Gravity:1.32
Evaporation Rate & Reference:1 (BUTYL ACETATE=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:AEROSOL SPRAY, SOLVENT SMELL
Percent Volatiles by Volume:97
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS
Stability Condition to Avoid:WATER, REACTIVE METALS, WELDING ARCS
Hazardous Decomposition Products:CO2, CO, HYDROGEN CHLORIDE, PHOSGENES
Disposal
Waste Disposal Methods:DISPOSE OF ABSORBENT MATERIAL IN AN APPROVED
LANDFILL IN ACCORDANCE WITH ALL APPLICABLE REGULATIONS. PLACE
WRAPPED CONTAINERS IN TRASH FOR DISPOSAL. DO NOT INCINERATE. LIQUID
MAY BE INCINERATED ACCORD ING TO LOCAL, STATE AND FEDERAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.